Cutting your fret slots

Perspex Fret Slotting Saw depth guide With brass thumbscrews to fit the Tonetech fret slotting saw Depth is adjustable from 1mm to 6mm The guide is made

Fret slots should be clean and deep enough to receive the tang with room to spare On bound necks, make sure you get the binding glue out of the corners You'll

fret slot saw Removable clear acrylic depth stop to precisely set any fret slot depth Our most efficient saw for fret slots! Handmade, each saw cuts on the pull-stroke

fret slot width A correct fingerboard thickness should be roughly 14″, meaning your cut depth should roughly be 18″ Cutting at a 18″ depth will ensure that