Setting Up Holley Transfer Slots

holley transfer slot adjustment   Dan tarikan jp paus slot gacor

In the idle condition the transfer slots should give the appearance of a small square when viewed from underneath the base plate

Holley transfer slot restrictor modification Now I know a lot of folks will either use a 832 or 1032 brass allen cup screw and drill it out This leaves the fuel to be adjusted by the primaries and the transfer slots The transfer slot should be a small square as mentioned If it is

fruitastic slot The best way to go about it is to take the carb off, turn it upside down, and eyeball the amount the slot is exposed with the throttle You will first remove the sight plug, then to make your adjustment you will need to loosen the lock screw on the needle and seat This will allow you to turn