3D Hole Edit

These callouts use standard symbols for number of places, diameter, depth, counterbore, and countersink Figure 11-5 For a slotted hole, the diameter is

3D Hole Edit 34mm hole diameters are preferred Larger diameters than these can be used but anchorage capacity may be reduced Holes larger than 36mm and smaller than 32mm

These callouts use standard symbols for number of places, diameter, depth, counterbore, and countersink Figure 11-5 For a slotted hole, the diameter is

slot sigmaringen the hole size for the shear face, generally the hole diameter, but for slotted holes parallel to the slotted holes are given in 7 Reference Standards:

Standard Tool bits used for creating slots have normal tolerance of +- or +- This may change depending upon the size and function of the

slot of doom canada post Standard holes are the default in IDEA StatiCa Oversize holes can be achieved by editing the hole diameter in the bolt assembly Slotted holes can be defined

The vast majority of the time you will use standard holes, which are larger in diameter than the bolts that they hold For bolts less than 1 diameter, the